GYT(Z)S metallic stranded Loose Tube Cable with Steel tape armour

GYTZA , metallic stranded Loose Tube Cable with Aluminum tape
GYT(Z)A, metallic stranded Loose Tube Cable with Aluminum tape
11/12/2016
GYT(Z)A53 , GYTA53
Directly Buried Cable
11/12/2016

GYT(Z)S metallic stranded Loose Tube Cable with Steel tape armour

GYTZS , GYTS , metallic stranded Loose Tube Cable with Steel tape armour

GYTZS , GYTS , metallic stranded Loose Tube Cable with Steel tape armour

The fibres are positioned in a loose tube made of PBT. The tube is filled with a water-resistant filling compound. A steel wire locates in the center of core as a metallic strength member. The tubes (and the fillers) are stranded around the strength member into a compact and circular core. The PSP is longitudinally applied over the cable core, which is filled with filling compound to protect it from water ingress. The cable is completed with a PE sheath.

 

Installation method: Inside tube, Lashed

Characteristics:

1. Excellent mechanical and temperature performance
2. Special tube filling compound ensure a critical protection of fibre and resist the water
3. Loose tube stranding cable core ensures the cable structure stable
4. Single steel wire as the central strength member to withstand axial loads
5.100% core filling water prevent cable jelly to ensure the cable watertight
6. Good water prevents and lateral crush resistance performance
7. Outer sheath protects cable from ultraviolet radiation

Applications: Long distance, LAN communication

Standards: YD/T 901 and IEC 60794-1

 

Temperature Range
TransportationInstallationIn use
-40~+70℃-5~+50℃-40~+70℃

 

GYT(Z)S

Fibre countConfigurationFiller NumberOuter

diameter

Minimum bend radiusMax. tensile loadCrush resistance
MassDynamicStaticShort termLong termShort termLong term
TubesFibresmmkg/kmmmmmNNN/10cmN/10cm
122×639.610520D10D15006001000300
244×619.610520D10D15006001000300
484×12110.312020D10D15006001000300
605×12010.312020D10D15006001000300
726×12011.015020D10D15006001000300
847×12011.615520D10D15006001000300
968×12012.317020D10D17006001000300
1089×12013.018520D10D18506001000300
12010×12013.620020D10D20006001000300
13211×12014.321520D10D21506001000300
14412×12015.023520D10D23506001000300
1928×24014.422020D10D22006001000300
28812×24017.230020D10D30006001000300

Flame-retardant, rodent protected or ant protected performance is available on request.Remark: The above parameters are just for reference.

The central strength member can be changed to be non-metallic according to customer’ s request.

 

Leave a Reply

Your email address will not be published. Required fields are marked *